Henan Union Precision Material Co., Ltd.,

Navigation >

Technical Support

Union Precision

Common question

Technical team

File download

Home > Technical support >

FAQ

What problems should be paid attention to when grinding and screening?

Aug 22,2022

1. Cleaning is a very important part of the grinding, but also easy to make people ignore a link. Should do "three not on the ground", that is, the research parts do not fall to the ground, tools do not fall to the ground, the material does not fall to the ground; to do "three not see the sky", that is, the display agent with the cover, the abrasive with the cover, the diluent (liquid) with the cover; to do " three clean", that is, the research tool to wipe clean before use, the sealing surface to clean, replace the abrasive to wipe clean the research tool and sealing surface.

2. After the use of research tools, should be cleaned, prohibit littering, placed in order to use.

3. grinding should pay attention to check whether the grinding tool and the valve body friction phenomenon, especially the inner wall of the valve body rough, scarring and table shoulder is a factor that causes unstable movement of the grinding tool. In the grinding and sieving should pay attention to the degree of coarseness of grinding, as well as the final to measure.

FAQ

■

How can graphene dispersant solve the problem of dispersion of powder in slurry?

—

Aug 22,2022